More comfort & safety through our radio system
Swing Gate Operator twist XL
twist XL
The extremely powerful swing gate operator for oversized gates up to 7 m leaf width
The twist XL from SOMMER is an extremely powerful swing gate operator for oversized gates: up to 1,100 kg leaf weight or 7 m leaf width, featuring soft operation, electronic force measurement, and universal use for left- and right-handed installation as well as for single- or double-leaf gates.
Technical data
| twist XL | |
|---|---|
| Gate weight max. | 1,100 kg |
| Max. gate leaf width | 7,000 mm |
| Max. gate inclination | 10 % |
| Max. gate filling | 100 % |
| Rated voltage range 1 | 220-240 V |
| Rated frequency | 50-60 Hz |
| Motor voltage | DC 24 V |
| Max. Thrust speed | 20 mm/s |
| Max. Opening angle | 110 ° |
| Number of radio channels | 2 |
| Motor duty cycle | ED 40% S3 |
| Protection class | IP44 |
| Protection control unit | IP65 |
| Temperature min. | -25 °C |
| Temperature max. | 70 °C |
Control unit twist XL
- In housing (IP 65)
- Radio receiver SOMup4 FM 868.95 MHz (SOMloq2), pluggable
- 4-command handheld transmitter Pearl Vibe (#4019V000)
Control unit twist XXL
- In large housing (IP 67)
- With contact protection
- Pre-installed main switch
- Radio receiver SOMup4 FM 868.95 MHz (SOMloq2), pluggable
- 4-command handheld transmitter Pearl Vibe (#4019V000)
Product advantages
Flexible
- universally suitable for DIN left and DIN right
- single- and double-leaf operation as well as mixed operation with twist M / ML and twist 350 possible
- suitable for closed gate panels
- suitable for outward-opening gates with special fittings
- microprocessor control with a wide range of settings, such as pedestrian gate function, automatic closing, adjustable speed and pre-warning time, and adjustable behavior when encountering an obstacle (full or partial reversal)
- interface for TorMinal programming device
- fast installation and simple electrical connection
Safe
- the patented SOMMER braking system makes the operator highly resistant – even under extreme forces of up to 3 tons, e.g. due to wind load or vandalism
- self-locking without electric lock up to 5 m
- accident protection through electronically controlled force measurement with DPS (Dynamic Power System)
- operator can be manually released in any position (e.g. in case of power failure)
- connections for safety devices such as warning light and photocell (2- and 4-wire), as well as for an external device (DC 24 V), potential-free relay contact
Innovative
- controlled soft start/stop in ramp form without loss of force
- gate-friendly operation thanks to spring-mounted threaded spindle
Determine A-B dimensions and set end positions
The swing gate operator twist 200 E is used as an example to show how to determine the A-B dimensions and how to set the end positions. The diagram can be transferred to the swing gate operators twist M, twist ML, twist 200 EL, twist 350 and twist XL. The possible A-B dimensions can be found in the A-B dimension tables of the respective assembly and operating instructions. It is shown how the travel length can be extended and shortened with the setscrews.
Fittings
Special installation situations require special fittings
SOMMER has the right post fitting for almost every installation situation. From galvanised to stainless steel, to fittings for inclined gates, we cover all areas.
This minimises difficult assembly work. Which saves money.