twist 200 EL
Now also available with our bidirectional radio control system SOMloq2.
With the SOMup4 radio receiver module, existing operators can be quickly converted to SOMloq2.
The powerful operator with even more lift
With even more lift, this operator is a real all-rounder: the longer travel length of 550 mm ensures the highest installation flexibility even if the posts are very wide.
Product advantages
Large opening angle
The operator can achieve an opening angle of up to 130°.
More strength for more security
Through the incline position, the operator can provide a higher force when the gate is closed so that breaking in is more difficult.
Power failure - what now?
To open your gate when there is a power failure, the mechanical emergency release can be activated manually with a key. Even if there is strong contact pressure on the operator, the release lock can be triggered with low application of force and you can get to your property.
Functions which make daily life easier
The walk-through function can be used to open a gate wing and reach the property by bike, for example. This makes an additional garden gate unnecessary, making it possible to fully utilise the whole width of your driveway.
With the automatic closing function, you can be sure that the gate is always locked behind you. After the photo eye is passed, the gate automatically closes after a set time.
Thought out to the last detail
Since the cable outlet is not on the underside, damage caused by pulling on the floor is prevented. This enables a lower mounting height on the stable gate bottom beam. Better transmission of force and better appearance are the result.
Combining operators
If the active gate wing is small, you typically can use a weaker operator than with a large gate wing. You can save space and money by taking advantage of the option of combining operators.
Mixed operation is possible with the twist 350 and twist XL operators*.
* twist 200 E/EL operators and twist 350-/XL control units can only be operated in combination with the "twist XS" (item no. 3248V000) conversion set.
Additional special features for longer travel lengths for the twist 200 EL
- The operator can also be fitted to very wide posts without removing them beforehand
- An opening angle of up to 130° is even possible with this operator
Technical data
| Description | twist 200 EL |
| Gate wing weight: | Max. 300 kg** |
| Gate wing width: | Max. 2.5 m*** |
| Travel length: | 390 mm (twist 200 E) 550 mm (twist 200 EL) |
| Power supply: | AC 220 ... 240 V |
| Motor voltage: | DC 24 V |
| Rated frequency: | 50/60 Hz |
| Temperature range: | –30°C to +70°C |
| Protection class: | Operator: IP44 Control unit: IP65 |
** With max. gate wing width of 1.5 m
*** With max. gate wing weight of 200 kg
Scope of delivery
Operators with SOMloq2 radio control system
Secure encryption
The future-proof SOMloq2 radio control system offers maximum protection against hackers due to 128-bit AES encryption with Rollingcode.
Repeating radio signal
The auto-repeat function ensures convenient opening while approaching the building. The output radio signal repeats in a certain cycle to enable optimal availability.
High radio range
With the innovative hop function, the range is extended, as radio signals are forwarded from SOMloq2 receivers.
Also for existing SOMMER operators
Transmitters with SOMloq2 are backward compatible with the Somloq Rollingcode radio control system, making it possible to control existing operators and radio receivers.
twist 200 EL, 1-wing (SOMloq2)
- Including 1x twist 200 EL swing gate operator
- Control unit in housing
- Post and hinged double door fitting
- Radio receiver SOMup4 FM 868.95 MHz (SOMloq2), pluggable
- 4-command handheld transmitter Pearl Vibe (# 4019V000)
Item no. S11522-00001
twist 200 EL, 2-wing (SOMloq2)
- Including 2x twist 200 EL swing gate operator
- Control unit in housing
- Post and hinged double door fittings
- Radio receiver SOMup4 FM 868.95 MHz (SOMloq2), pluggable
- 4-command handheld transmitter Pearl Vibe (# 4019V000)
Item no. S11523-00001
Video
Determine A-B dimensions and set end positions
The swing gate operator twist 200 E is used as an example to show how to determine the A-B dimensions and how to set the end positions. The diagram can be transferred to the swing gate operators twist 200 EL, twist 350 and twist XL. The possible A-B dimensions can be found in the A-B dimension tables of the respective assembly and operating instructions. It is shown how the travel length can be extended and shortened with the setscrews.