Tested and certified according to strict guidelines. Made in Germany.
Garage door operator SOMMER pro+
Intelligent garage door operator with separate control unit
SOMMER pro+
Intelligent garage door operator with separate control unit
The SOMMER pro+ garage door operator combines our most advanced garage door control unit with the flexibility of a separate control unit. There are three alternatives for separate installation of the control unit (front, rear or on the ceiling) so that existing sockets can be used. The integrated button in the control unit housing offers additional convenience in the garage.
Separate control unit
Can be installed on a wall or ceiling thanks to a separate garage door control unit. The existing power outlet in the garage is optimally suited for the power supply. If mounted on a garage wall, the wall buttons are conveniently close to the exit. The control unit, which can be installed separately, makes an additional power socket and complex electrical work unnecessary.
Configurator for garage door operators
Unsure which of our garage door operators is right for your garage door? We will help you to find the right door operator for your garage door and discover other accessory options in three simple steps.
Quality - Made in Germany
Quiet and durable
Thanks to technology that protects the gearbox, the garage door operator is extremely quiet, low-wear and has a very long service life.
Maximum security
The system monitors the closing forces in accordance with EN 12453 using electronic motor monitoring. This control mechanism creates maximum security.
Intelligent control technology
The system reads in the required force fully automatically, continuously adapts it to the external conditions and thus ensures maximum safety.
Technical data
| S 9060 pro+ | S 9080 pro+ | S 9110 pro+ | |
|---|---|---|---|
| Max. pull and pushing force | 600 N | 800 N | 1,100 N |
| Max. door width / door height sectional door | 4,500 mm / 2,500 mm | 6,000 mm / 2,500 mm | 8,000 mm / 2,500 mm |
| Max. door width / door height one piece door | 4,500 mm / 2,750 mm | 6,000 mm / 2,750 mm | 8,000 mm / 2,750 mm |
| Max. door width / door height up-and-over door | 4,500 mm / 2,050 mm | 6,000 mm / 2,050 mm | 8,000 mm / 2,050 mm |
| Max. door width / door height hinged double door | 2,800 mm / 2,500 mm | 2,800 mm / 2,750 mm | 2,800 mm / 3,000 mm |
| Max. door width / door height side-opening sectional door/side-opening door | 4,500 mm / 2,500 mm | 5,750 mm / 2,750 mm | 6,850 mm / 3,000 mm |
| Travel length (standard) | 2,750 mm | 2,750 mm | 2,750 mm |
| Max. travel length extended | 4,900 mm 2× extensions (1,096 mm) |
6,000 mm 3× extensions (1,096 mm) |
7,100 mm 4× extensions (1,096 mm) |
| Max. door weight | 120 kg | 160 kg | 200 kg |
| Max. running speed | 240 mm/s | 210 mm/s | 180 mm/s |
| Power consumption (power-saving mode) | 0.98 W | 0.98 W | 0.98 W |
| Duty cycle after S3 in % | ED 40% S3 | ED 40% S3 | ED 40% S3 |
| Number of radio memory positions | 40 | 40 | 40 |
| Max. recommended number of bays | 30 | 50 | 30 |
Installation & Commissioning
In our installation video, we show you how to install and commission a SOMMER base+ garage door operator
Service-Interface SOMlink S2
By professionals for professionals. Intelligent control technology for specialist dealers.
Intelligence
- Automatic learning process: self-learning force curve with continuous adjustment, e.g. summer/winter operation
- Optimized speed profiles for fast opening and safe closing
- Standard-compliant operation
- Automatic calibration of the door travel by directly entering the measured operating forces
- Preselectable door types via DIP switches
- Active braking for pulling gates
- Transmission-friendly soft start and soft stop
- Automatic end position detection in door CLOSED when teaching, the closing pressure can also be individually adapted to the structural conditions
- Serial port for the Delta Dore X3D module or HomeLink wireless receiver module
Flexibility
-
Numerous accessories for expansion (e.g. memory expansion Memo, humidity sensor Senso, locking magnet Lock, LED additional lighting Lumi+)
- Removable carriage without dismantling the rail
- Simple shortening or lengthening of the track
- Compatible with the smart home solution SOMweb for easy control of the garage door via smartphone app or web browser.
- With the radio code button Telecody Courier the garage to the smart parcel depot.
FAQ
Frequently asked questions and answers
The assembly and operating instructions for the SOMMER pro+ can be downloaded from the download portal.
How to use a hand-held transmitter from SOMMER, e.g. B. Pearl, Pearl Vibe, Pearl Status, Pearl Twin, Slider+, Slider Vibe on a SOMMER garage door operator with SOMloq2, we show in the following Video. You will find a detailed description in the assembly and operating instructions.
The HomeLink radio receiver module can be used to control drives and controls with the SOMloq2 radio system. The radio receiver module is connected via the serial interface on the carriage using Plug & Play installed.
Yes, with the smart home solution SOMweb, door operators can be easily controlled using an app or browser on a smartphone, tablet or PC.
The SOMMER base+, SOMMER pro+ garage door operators and the RDC Vision+ roller door control are compatible with the smart Telecody Courier parcel depot.
The smart parcel deposit from SOMMER allows the deliverer to deposit a parcel in the garage. The opening height of the garage door can be determined individually. There are two security levels to choose from: The gate can be opened using the red button or an individual numerical code.
Specialist dealer
Find a retailer near you
Our specialist dealers provide the perfect and safe all-round service for full customer satisfaction.