Swing Gate Operators twist UG / twist UG+
twist UG / twist UG+
For swing gates where the operator should not be visible
The underground operators twist UG / UG+ from SOMMER combine invisible integration with strong performance. Installed below ground, they move gate leaves up to 3.5 m in width and 350 kg (UG+ up to 600 kg) – robust, safe and ideal for residential and commercial gates.
Technical data
| twist UG | twist UG+ | |
|---|---|---|
| Gate weight max. | 350 kg | 600 kg |
| Max. gate leaf width | 3,500 mm | 3,500 mm |
| Max. gate filling | 90 % | 90 % |
| Rated voltage range 1 | 220-240 V | 220-240 V |
| Rated frequency | 50-60 Hz | 50-60 Hz |
| Motor voltage | DC 24 V | DC 24 V |
| Max. Opening angle | 105 ° | 105 ° |
| Number of radio channels | 4 | 4 |
| Motor duty cycle | ED 40% S3 | ED 40% S3 |
| Protection class | IP67 | IP67 |
| Protection control unit | IP65 | IP65 |
| Temperature min. | -25 °C | -25 °C |
| Temperature max. | 65 °C | 65 °C |
Product advantages
Flexible
- single- and double-leaf operation possible
- fully or semi-automatic closing function. The hold-open time can be shortened after passage
- operator can be manually released in any position (e.g. in case of power failure)
Safe
- bidirectional radio system SOMloq2 (FM 868.95 MHz) ensures convenience and secure encryption
- certified limitation of closing forces according to EN 12453 through electronic motor monitoring
- lockable mechanical emergency release
- integrated evaluation unit for safety contact strip
- optional safety devices can be easily connected (e.g. safety edge, photocell, electric gate lock, warning light)
Innovative
- gear-protecting soft start and soft stop without loss of force thanks to electronic motor monitoring
- automated learning process – quick setup of end positions and operating forces with few reference runs
- versatile settings and service information via the SOMlink S2 interface
Quality
-
high-quality DC gear motor in die-cast aluminum housing with Hall sensor
- weather-resistant stainless steel housing
FAQ
Frequently asked questions and answers
The installation and operating manual for the twist UG+ can be downloaded from the download portal. Go to downloads
The difference between the swing gate operators twist UG and twist UG+ is the gate weight per wing. The twist UG is for swing gates with a gate wing weight of up to 350 kg, the twist UG+ for swing gates with a gate wing weight of up to 600 kg.
The swing gate operator twist UG+ is ideal for heavy swing gates where you don’t want the operator to be visible. The operator can be mounted between or in front of the gate posts. It is important to make sure that the rotation point of the gate is also the rotation point of the operator.