SOMweb

The secure Smart Home solution
SOMweb is the secure Smart Home solution where your data stay in the garage. This system enables you to control operators via a smartphone app or web browser. The data are safe, as they are not saved on external servers, but quite literally remain at home.
To find out whether SOMweb is compatible with your operator, see Compatibility.
Other benefits
Compatibility
The SOMweb is compatible with the following products:

The operator only functions with a connected photocell.
Safety
The integrated server stores all data on the SOMweb. No user data are stored on external servers, which are a potential target for hackers due to their high data volumes. This means the best possible protection of your data against hackers. Communication between SOMweb and operator takes place via SOMloq2 radio control system with 128-bit AES encryption. Push messages on door movements and the optional video function ensure even greater security outside the visible range.
Convenience
With the SOMweb app, you can control all your operators at the touch of a finger.
Smart Home integration
Integrate the SOMweb into your Smart Home and control your garage doors via your usual system.
Video function
User management
With the comprehensive user management system and access control, you can define time- or location-dependent access to doors for an unlimited number of users.

Initial operation of the SOMweb app
Installation and initial operation with iOS / iPhone
Installation and initial operation with Android
All advantages at a glance
* IP camera required. Bookable plug-in.
FAQs
The SOMweb installation and operating manual can be downloaded from the download portal. Go to instructions
Note that the SOMweb must be in a location where it is both within the range of the WiFi router and within the radio range of the operator.
Check that your operator is compatible with the SOMweb. Go to Compatibility
Check that the SOMweb is connected to your WiFi network. Also, identify and eliminate any sources of interference which may disturb WiFi radio operation .
If the SOMweb is connected to the correct network, check your photocell. If it is defective, it must be repaired or replaced in order to use the SOMweb. Also, check that your operator is compatible with the SOMweb. Go to Compatibility
Check that the SOMweb is connected to your WiFi network. Also, identify and eliminate any sources of interference which may disturb WiFi radio operation .
If the SOMweb is connected to the correct network, check your photocell. If it is defective, it must be repaired or replaced in order to use the SOMweb. Also, check that your operator is compatible with the SOMweb. Go to Compatibility
The Smart Home solution SOMweb can only be operated if a photocell is connected. You can find a list of all compatible operators under Compatibility.
Changing the password
You can change your password in the user management of the app.
Resetting the password
For security reasons, if you have forgotten your SOMweb password, carry out a hardware reset (restoring the factory settings) and then put the SOMweb into operation again. A hardware reset deletes all settings which have been made. The Admin and users will then no longer be able to locate the SOMweb. The SOMweb must be reinstalled and connected to the end devices.
You will find the Reset button on the front of the SOMweb. Press and hold the Reset button using a thin (but not sharp) object until the Status LED blinks red. The factory settings have now been restored.
You can find more information in the installation and operating instructions.
To find out how to add devices to the Apple Home App, see Apple FAQs.
Open the SOMweb app and go to the Settings. Select the menu item “Apple HomeKit” and follow the instructions. Click Reset.
To find out how to add devices to the Apple Home App, see Apple FAQs.
Check whether the network LED on the SOMweb lights up continuously in blue. If this is not the case, carry out a reset of the network and the SOMweb.
Open the WiFi settings on your smartphone, tablet or PC. Select the SOMweb hub and start the application via the SOMweb app. Confirm the query "Has Apple HomeKit already been installed?" with "Yes."
Check that the SOMweb is logged in to the same network as your mobile end device with the Apple Home App. Also, make sure that you did not skip a step during installation of your SOMweb. You can also read on the Apple website how a device is added to the Apple Home App.
To find out how to add devices to the Apple Home App, see Apple FAQs.
Read the Apple instructions on enabling Smart Home devices for further users. Go to Instructions
Yes, you can. But first, you need to integrate the SOMweb into an existing network; to do this, simply carry out the standard installation procedure. Then you can select “WiFi mode stand-alone” in the settings of the SOMweb app under the menu item WiFi.
The Google Home password is used for authentication of a voice command when using Google Home. If you do not use Google Home, you can enter “1234” as the password, for example.
See the IFTTT website or install the app on your smartphone. Then register with your account data. Create a new account if you do not already have one. Go to IFTTT
Enter “GarageWifi & Gates“ in the search field and select the corresponding service from the applets displayed. In the next screen, select “Connect.” You will then be redirected to an external website.
A registration window opens. In this window, enter “Remote Access URL,” a user name and a password. You can find the “Remote Access URL“ under “Website” in the device information in the settings of your SOMweb app. Copy and paste the link into the field “Remote Access URL“ and enter the user name and password for your SOMweb. Now click “Authorize” and in the following screen, select the applet you wish to activate.
Your SOMweb is already enabled for “Google Assistant.” To activate the Google Assistant, please follow the instructions from Google. Go to instructions
We recommend our IP cameras for use inside or outside. Go to IP cameras
Is my existing IP camera compatible with the SOMweb Smart Home solution?
You can find a list of compatible IP cameras under IP camera compatibility overview.
You can find a list of compatible USB Ethernet adapters in the download portal
Technical data
Designation | SOMweb |
Item Number | S11342-00001 |
Radio control system | SOMloq2 |
Frequency | FM 868.95 MHz |
Input (plug-in power supply unit) | 100–240 V, 50/60 Hz |
Output (plug-in power supply unit) | DC 5 V, 1 A |
WiFi | 2.4 GHz / IEEE 802.11b/g/n |
Connections | USB |
Protection class | IP20 |
Dimensions (without power supply unit) | 102 x 80 x 28 mm |