twist UG


twist UG

Product advantages

Invisible in attractive gates
The operator is mounted in the floor and does not affect the appearance of the gate in any way. The design of the gate is accentuated.

Protection for you and your loved ones
The control technology monitors the movement forces according to EN 12453 by means of electronic motor monitoring. Continuously tested and programmed force values, also detects environmental changes (temperature, mechanical door wear, frost and ice) and compensates for these.
This ensures optimal security for people and vehicles at all times. SOMMER also offers additional safety accessories. (Photo eyes, safety contact strips, etc.)

Safety thanks to encrypted radio control system
The SOMloq2 bidirectional radio control system transmits radio signals in both directions. Feedback on the send command or the door position can be received. The rolling code is encrypted with 128 bits.

Power failure - what now?
To open your gate when there is a power failure, the mechanical emergency release can be activated manually with a key. Even if there is strong contact pressure on the operator, the release lock can be triggered with low application of force and you can get to your property.

Simple retrofitting of accessories
Thanks to our modular system, accessories can be installed quickly and at any time.
Connection options for 8k2 safety contact strips are already integrated on the control unit by default.
With the existing multi-function relay, you can connect and control external devices (e.g. yard light). You can also extend the convenience and safety functions of your operator at a later time if your requirements change.

Convenience in the event of a power failure
During a power failure, the operator can be run in emergency mode with our optional battery pack. You can sit comfortably and securely in your car at night or if the weather is bad.

Functions which make daily life easier
The walk-through function can be used to open a gate wing and reach the property by bike, for example. This makes an additional garden gate unnecessary, making it possible to fully utilise the whole width of your driveway.
With the automatic closing function, you can be sure that the gate is always locked behind you. After the photo eye is passed, the gate automatically closes after a set time.
The operator uses the warning light to signal whether and when gate maintenance is needed. This considerably increases the lifetime of the gate and the operator.

Save money and protect the environment
The energy-saving operator consumes about < 0.5 watt of energy a year in standby mode, amounting to about €1.80 in electricity costs. It is thereby not only inexpensive to operate, but also environmentally-friendly.

Long lifetime thanks to gentle soft running
The gate and the operator are preserved thanks to the "Open" and "Close" soft running. Shortly before the gate end positions, the speed decreases, which preserves the mechanics and increases the lifetime. No annoying closing noises.

Reliable with frequent use
The operator is well-suited for multiple-family houses. Operating time 40% - that means in operation for 4 minutes out of 10.

Carefree with high-quality materials
The housing consists of stainless steel and stainless aluminium which withstands stress caused by weather. Optionally available with galvanised steel.

Application example, SOMMER twist UG
SOMMER twist UG details

Additional equipment

You can create your own optional value-added product with our additional equipment. The modular system structure makes it possible to expand the twist UG with countless accessories in line with the "plug and play" principle. All accessories are easy to install since sockets are colour-coded and exactly labelled.

Memo

SOMMER Memo

Used to expand the memory to 450 transmitter commands. During service, saved data can be easily adopted for a new carriage.

# 10373

Battery pack

SOMMER battery pack

In the event of a power failure, the battery pack supplies energy to the gate operator for up to 12 hours with a maximum of 10 gate cycles (OPEN/CLOSE). The battery pack is automatically recharged during normal operation.

# 5115V001

SOMMER twist UG control unit

Technical data

Designation twist UG twist UG+
Gate weight per wing max. 350 kg 1), 2) max. 600 kg 1), 3)
Gate width per wing max. 3,500 mm 1), 2) max. 3,500 mm 1), 3)
Gate inclination - -
Gate filling max. 90% closed (depending on the width and height of the gate) max. 90% closed (depending on the width and height of the gate)
Operator principle Electromechanical swing gate operator Electromechanical swing gate operator
Housing stainless steel or hot-dip galvanised finish stainless steel or hot-dip galvanised finish
motor high-quality DC gear motor with hall sensor high-quality DC gear motor with hall sensor
Motor safety device via microprocessor, power-monitored via microprocessor, power-monitored
Motor control unit twist UG DT-C-1 twist UG DT-C-1
Voltage supply AC 220–240 V, 50/60 Hz / Motor voltage DC 24 V AC 220–240 V, 50/60 Hz / Motor voltage DC 24 V
Angular velocity 10°/s 10°/s
max. opening angle 105° 105°
Accident prevention through automatic obstacle detection through automatic obstacle detection
Limit switch Path measurement Path measurement
Emergency release on the operator; secured with a lock, simple operation on the operator; secured with a lock, simple operation
Soft start / soft stop Controlled soft run in ramp form without power loss Controlled soft run in ramp form without power loss
Automatic closing function can be set via DIP switch can be set via DIP switch
Dead-man function Yes Yes
Walk-through door function Yes Yes
Pulse mode OPEN / STOP / CLOSE / STOP /…, defined OPEN/CLOSE can be set OPEN / STOP / CLOSE / STOP /…, defined OPEN/CLOSE can be set
Close sequence self-learning self-learning
Number of radio channels 4 4
Operating mode S3  40% S3  40%
Protection class Operator: IP67 / Control unit: IP65 Operator: IP67 / Control unit: IP65
Temperature range -25 °C to +65 °C -25 °C to +65 °C

 
1) In compliance with the norms and standards listed in the Declaration of Installation, particularly DIN EN 12453.
2) For wing lengths from 3 m and gate weights of 300 kg or more, active safety contact strips must be used.
3) The use of active safety contact strips is mandatory in compliance with the norms and standards listed in the Declaration of Installation, particularly DIN EN 13241.

SOMMER twist UG+ dimensions

All dimensions are in millimetres; subject to misprints, errors and technical changes.

Scope of delivery

twist UG set for 1-wing Swing gate DIN left

  • 1 twist UG DIN left
  • 1 control unit
  • 1 "Pearl Vibe" transmitter

Stainless steel
Item no. S10603-00001

Hot-dip galvanised
Item no. S10904-00001

SOMMER twist UG set, 1-wing DIN, left

twist UG set for 1-wing Swing gate DIN right

  • 1 twist UG DIN right
  • 1 control unit
  • 1 "Pearl Vibe" transmitter

Stainless steel
Item no. S10604-00001

Hot-dip galvanised
Item no. S10905-00001

SOMMER twist UG set, 1-wing DIN, right

twist UG set for 2-wing Swing gates

  • 1 twist UG DIN left
  • 1 twist UG DIN right
  • 1 control unit
  • 1 connecting cable set
  • 1 "Pearl Vibe" transmitter

Stainless steel
Item no. S10605-00001

Hot-dip galvanised
Item no. S10906-00001

SOMMER twist UG set, 2-wing

FAQs

Where can I find the manual for the twist UG?
What is the difference between the twist UG and the twist UG+?

The difference between the swing gate operators twist UG and twist UG+ is the gate weight per wing. The twist UG is for swing gates with a gate wing weight of up to 350 kg, the twist UG+ for swing gates with a gate wing weight of up to 600 kg.

Where can I install the twist UG?

The swing gate operator twist UG is ideal for swing gates where you don’t want the operator to be visible. The operator can be mounted between or in front of the gate posts. It is important to make sure that the rotation point of the gate is also the rotation point of the operator.