pro+ / base+
Highest level of flexibility (pro+)
Flexible wall or ceiling installation thanks to the separate control unit housing of the pro+. No additional power sockets need to be installed on the ceiling. The integrated button in the control unit housing offers additional convenience in the garage.
Safety thanks to encrypted radio control system
The garage door operator with bidirectional, rolling encrypted radio control system provides maximum security. The SOMloq2 radio control system transmits bidirectionally, which means that feedback on the send command or the door position can be received. The rolling code is encrypted with 128 bits, the same encryption that is used for online banking. Backward compatibility of the transmitter to the Somloq Rollingcode radio control system is always available.
Useful extensions such as the Memo memory space extension, the Senso humidity sensor and countless other accessory modules are also available. Additional connection options are located directly on carriage (slip door contact and safety contact strip OSE or 8k2). Thanks to our modular system, extensions can be installed quickly and easily. Since the connections are located directly on the carriage, no spiral cables are necessary, saving you time and money.
Battery pack for power failures
During a power failure, the operator can be run in emergency mode with our battery pack and the door will never fail.
Restriction of closing forces
The system monitors the closing forces according to EN 12445 by means of electronic motor monitoring. The control mechanism creates maximum security.
Thanks to the integrated SOMMER emergency release system, the carriage can be engaged and disengaged in any position. This ensures security in any position, even if there is a power failure.
Environmental and cost efficiency
The energy-saving operator consumes about < 1 watt of energy a year in standby mode, amounting to about €1.80 in electricity costs. It is thereby not only inexpensive to operate, but also environmentally-friendly.
Safety thanks to travelling lighting
Lighting is integrated in the carriage which provides constant lighting to the danger zone. The LED lighting is equipped with 6 individual LEDs which are switched to two safety circuits - double is always better.
Smooth-running and long-lasting
Thanks to the gear-saving technology, the garage door operator is extremely quiet, low-wear and has a very long lifetime. The operator is completely maintenance-free.
Optimal application of force
The motor track carriage moves itself along a permanently tensioned chain so that no frictional loss and no loss of power occurs as does with a revolving chain.
The galvanised chain is maintenance-free and does not need to be oiled. This prevents oil spots from getting on the door or vehicle.
Improved fire prevention
Due to the flame resistant materials, the operator offers a high safety factor and protects from fires starting.
Universal use – compatible with almost all door types
The base+ and pro+ garage door operators are well-suited for sectional doors, overhead doors, up-and-over doors, swinging doors, hinged double doors, side-opening sectional door, side-opening doors and sliding gates in buildings. You can achieve optimised door parameters with the easy DIP switch function directly on the operator.
Our garage door operators are tested and certified according to the strictest guidelines. 30 years ensures that our products are of the highest quality and naturally, "Made in Germany".
- pro+ is the innovative successor of the successful base+ garage door operator from SOMMER: Now even more flexible and convenient
due to the separate control unit housing
- Universal operator for sectional doors, overhead doors, swinging doors, up-and-over doors*, hinged double doors*, side-opening sectional doors and sliding gates
- Integrated LED technology: durable, energy-saving and efficient lighting
- Saves power: <1 watt standby
- Made in Germany
- Modular system (modular system structure): universal application for ceiling / wall mounting
- Everything in one box
- Packaging uses small amounts of resources: compact, environmentally friendly, recyclable
- Good storage capacity: easy transport to the construction site
- One-piece pre-mounted track possible
- Easy to extend
- Easy to shorten
- Slip door safety device without spiral cable: can be connected directly on the carriage
- Safety contact strip without spiral cable: can be connected directly on the carriage
- Countless accessories, easy to install thanks to colour-coded and exactly labelled sockets
- one-piece-flow: Flexible individual types can be generated quickly
Flexible installation types for pro+
The SOMMER pro+ combines our most advanced garage door control unit with the flexibility of a separate control unit housing. There are three alternatives for separate installation of the housing (front, rear or on the ceiling) so that existing power sockets can be used and you can enjoy the highest level of customised convenience. This is how our operator becomes your operator.
At the same time, the integrated button is used for controlling the door and lighting.
"Rear" installation type
"Ceiling" installation type
"Front" installation type
- Pre-mounted operators and one-piece track - quicker installation
- Easy installation of the operator on the ceiling: Direct installation on the ceiling with 1 screw, variable ceiling bracket can be installed later, can be adjusted horizontally and vertically
- Wall mounting, no additional power socket on the ceiling necessary
- If installed on the wall, short wiring paths to the photo eye
- Integrated wall switch, no additional mounting for the button
- Carriage can be inserted or replaced using the mounted track
- Standard design: pre-mounted carriage with retracted chain in the track part
- Output for control cable in the front and back and universal power supply on the track - flexible
- Individual closing pressure adjustment
- Can be adjusted mechanically: only 1 reference limit switch
- Automatic end point detection in door CLOSE using a mechanical reference point
- Intelligent soft running adjustment depending on the door weight
- Automatic ramp measurement depending on the door weight
- Gear-saving soft stop/start
- Individual customer labels
Intelligent control technology
- Automatic learning process: self-learning force curve with continual adjustment, e.g. summer/winter mode
- Optimal speed profiles for quick opening and secure closing
- Standard-compliant operation, can be customised with a force measurement device
- Automatic calibration of door operation through direct entry of measured operating forces
- Door types can be selected via DIP switch
- Active braking for moving doors
- Countless setting and querying options via SOMlink service module
- Automatic end position detection in door CLOSE when programming, the closing pressure can also be individually adapted to the structural conditions.
- Four pre-assigned radio channels can be controlled using a transmitter:
Pulse sequence / partial opening or lighting function / defined OPEN/ defined CLOSE
- Versatile connection options due to sockets on the SOMMER carriage:
- Slip door contact (also reed switch)
- OSE or 8K2 SKL
- Memo (memory space extension)
- Sensors (e.g. Senso humidity sensor)
- Lifting magnet (look)
- Position laser (laser)
- Alarm buzzer (buzzer)
- Motion detector (motion)
- USART interface for integration into SMART Home systems
- Wall/Ceiling control unit connection options
- 2- or 4-wire photo eye
- 24 V warning light
- External impulse button
- Socket for Lumi base+ supplemental lighting
- Socket for additional battery
- Socket for additional relay 230 V
You can create your own optional value-added product with our additional equipment. The modular system structure makes it possible to expand the SOMMER base+ and pro+ with countless accessories in line with the "plug and play" principle. All accessories are easy to install since sockets are colour-coded and labelled.
Magnet motor lock which mechanically blocks the motor in any position (even with ventilation function) up to an attack force of 300 kg, thereby improving the existing break-in protection.
Item no. 1651V000
For recording temperature and air humidity in the garage. The carriage automatically opens the door a bit if necessary (e.g. when the air humidity is too high), ensuring perfect circulation. When the optimal value has been achieved, the door is closed, reducing the risk of mould formation.
Item no. 10371
Used to expand the memory to 450 transmitter commands. During service, saved data can be easily adopted for a new carriage.
Item no. 10373
Additional LED lighting for the roof control. It is switched in parallel with the lighting in the carriage and can be easily
switched on and off using the light function by means of a transmitter.
Item no. 7041V000
Additional LED lighting for the wall control. It is switched in parallel with the lighting in the carriages and can be easily switched on and off using the light function by means of a transmitter.
Item no. S10205-00001
Two functions in one product: The alarm buzzer recognises a break-in attempt and outputs a loud signal tone. The warning buzzer, on the other hand, outputs an acoustic signal during the closing process or when the slip door is open.
Item no. 7043V000
Gives optical assistance for perfectly positioning a vehicle in the garage. The laser is active during the opening process and the set light burning time.
Item no. 10378
Additional relay for additional switching of a garage or courtyard light or another 230 V consumer.
Item no. 7042V000
A passive infrared sensor detects invisible thermal radiation from moving bodies (people/animals etc.) and reacts. When you enter the garage, the lighting on the operator is automatically switched on (supplemental lighting/relay) so that you can move around safely.
Item no. S10343-00001
Supplies energy to the operator for maximum 5 door cycles > in the event of a power failure.
Item no. S10523-00001
Allows the connection of two corded pulse buttons for control of the door and one external lighting unit. The operating mode “Defined opening” and “Defined closing” is optional.
Item no. S10807-00001
Transfers the door status (open/closed) to Smart Home systems. Optionally, a further external lighting unit can be operated.
Item no. S10854-00001
- Vehicle wall holder for Pearl transmitter available as an option
- Additional fitting for low headroom bracket
- Additional fitting for hinged double doors
- Pearl Status
- Bidirectional radio control system
- Individual function assignment when programming the radio control system by the user: Tip, toggle, partial opening, defined OPEN/CLOSE
- Noticeable quality thanks to confirmation of the radio signal through vibration feedback (with suitable transmitter)
- Door status display
- Targeted light control unit
- Programmed at the factory
- Reduction of radiation exposure in spite of higher data throughput in package mode
- Increase in reliability and range due to active forwarding (hop function)
- 128-bit AES encryption (as secure as home banking)
- Auto-repeat function for convenient opening while approaching the object
- Distance-dependent dead-man function for set-up mode
- Motor with high automatic locking and counter-pressure at all points in the event of an attempted break-in (even with ventilation function)
- Safety in use in the event of a power failure with battery pack for emergency operation
- Locking magnet for motor (protection against break-ins), locks in any position, even during ventilation function/partial opening (Lock #1651V000 available as an option)
- Thanks to the integrated emergency release, the carriage can be engaged and disengaged in any position
- Bidirectional, secure SOMloq2 radio control system
- Permanent RAM/ROM test
- Cyclically tested safety devices
- Sensitive: intelligent differentiation between necessary force for door operation and unusual obstacles
- Additional blockage detection
- Software fulfils safety class II
- EMC test in accordance with SOMMER house standard (requirements twice as strict as with the normal standard)
- If the emergency release is activated, the door can be locked again
Service – Maintenance
- SOMlink service
- Long-term event memory
- Maintenance intervals can be programmed
- Removable carriage without track disassembly
- Galvanised, nickel-plated and high-quality chain: no wear, no oiling and no chain re-tensioning necessary
- Clean: no oil or greased used, which means your door and car will not get soiled
5-year manufacturer’s warranty
|Description||S 9060 base+ /
S 9060 pro+
|S 9080 base+ /
S 9080 pro+
|S 9110 base+ /
S 9110 pro+
|Item no. base+||8700V000||8800V000||8500V000|
|Item no. pro+||S10154-0000||S10155-0000||S10156-0000|
|Max. travel path||7,500 mm||7,500 mm||7,500 mm|
|Max. door width/door height
Sectional, swinging, up-and-over doors
Side-opening sectional, side-opening, hinged double doors
|Travel length||2,750 mm||2,750 mm||2,750 mm|
|Max. door weight||120 kg||160 kg||200 kg|
|Max. pull and pushing force||600 N||800 N||1,100 N|
|Max. running speed||240 mm/s||210 mm/s||180 mm/s|
|Power consumption (standby)||< 1 W||< 1 W||< 1 W|
|Operating time after S3 in %||40%||40%||40%|
|Connection for warning light||Yes (DC 24 V/25 W)||Yes (DC 24 V/25 W)||Yes (DC 24 V/25 W)|
|Number of radio memory positions||40||40||40|
|Max. recommended no. of spaces||30||50||30|